Options trailed sprayers

EDS reduces overlap to a minimum. Each nozzle (nozzle spacing 50 cm) is separately controlled by the Section Control app.

The air suspension provides maximum comfort when driving on roads! The automatic level control makes sure the optimum suspension is maintained during load changes.

If the machine is equipped with air suspension, the air brake system will be provided with ALR. This automatic load control increases the braking force as soon as the tank is filled and will reduce the braking force as soon as the tank content diminishes.

The hydrant fill enables you to fill the machine with an external pump. This filling point is generously dimensioned and therefore has minimal resistance in the system. Furthermore the hydrant fill is provided with a venting valve to avoid the liquid from flowing back.

Pack pneumatics consists of a 12V compressor and a pressure switch. These make sure that the air tanks remain filled for the pneumatic nozzle shut-off. This option is redundant when the tractor is equipped with an air brake system.

When you work in hilly areas or when there are objects that are situated above the normal lifting height of the machine, variable geometry can be helpful. With variable geometry you will be able to move the left and right boom 9 degrees upwards and 9 degrees downwards. If you prefer this to be automatically controlled, then DBL++ is your solution. If you prefer this to be automatically controlled, then DBL++ is your solution.

Optionally a headland boom of 4, 5 or 6 meters on the right side of the machine can be delivered. On request, this can be provided with a hydraulic height adjustment. The headland boom is fully integrated in the circulation line.

With blue LED spray boom lighting, working in the dark is no longer a challenge. The spraying cone of each nozzle is perfectly illuminated. Up to a working width of 33 meters 2 blue LED work lamps are sufficient. For working widths beyond 33 meters a second set is recommended. The spray boom lighting can be switched on an off on the ISOBUS terminal.

An orange LED flashing light, installed on the rear side of the machine, is also optionally available. This flashing light can also be switched on and off on the ISOBUS terminal in the cabin.

If you work with large quantities and filling is done frequently, a dedicated centrifugal pump, solely for the purpose of filling, can be useful. This 1000 l/min hydraulic pump can be driven by a control valve of the tractor or by the LS system on the sprayer. This increases your capacity enormously!

Hydraulic pump drive with the help of a reliable 100 cc hydraulic motor. For this, a pressure compensated control valve is required.

Instead of the standard mechanical support leg, the AP Dubex field sprayer can optionally be equipped with a hydraulic support leg. This hydraulic skid shoe can be connected to a double functioning valve of the tractor.

The mudguards are equipped in black plastic. You can choose between the sizes 410, 610 or 710 mm, Obviously this choice depends on the installed tire size.

The trailed AP Dubex field sprayers come as standard with a high hitch with 40mm drawbar eye that can be adjusted to 4 different heights. Optionally available are a low hitch and a K80 coupling.

high hitch with 40 mm drawbar eye

The tire sizes mentioned below are available as standard. Naturally, on request additional sizes can also be delivered.