Stentor
Model Stentor is the largest model in our range trailed sprayers equipped with polyethylene tanks. This tank has a capacity of no less than 6000 litres, the empty weight of the Stentor is 3800 – 6000 kg.
Find a dealer in your neighbourhood >
AP DUBEX STENTOR
Technical specifications
Stentor 24-45m
Standard equipment
Spray booms
- Electro-hydraulic height adjustment.
- Electric/hydraulic tilt control.
- Electro-hydraulically simultaneously folding main booms / outer boom sections.
- Fully balancing boom suspension.
- “Superbalans” self-levelling spray boom.
- Anti-yaw damping.
- Impact guard system on outer boom sections back and forth.
- Safety hinges on outer boom sections.
Tank and pipes
- Three tank rinsing nozzles in tank.
- Polyethylene tank 6000 l (actual content 6600 l)
with 450 l clean water tank. - Level measurement Tank Control.
- Pump 2 x 260 l/min, 15 bar (30-45m).
- PTO shaft one side wide-angle.
- Digital pressure gauge.
- Stainless steel spray line (Aisi 304).
Frame
- Aluminium housing on back frame boom.
- Plastic caps.
- Storage locker (front right).
- Lockable storage box on top of machine.
- Stainless steel fitting materials.
- Liquid fertilizer resistant.
- Inductive flow meter.
- RDW LED road lights.
- Air braked wheels VF 380/90R46, 10 holes.
- Flange width 2000 mm.
- Track width : min. 1800 / max. 2250 mm.
- SKL tested according to directive NEN-EN-ISO 16122.
- Delivered with approval certificate EU regulation 167/2013
(30 km/h).
Spraying system
- Electrical control main valve and sections.
- 2 x ISOBUS controller MIDI 3.
- Full circulation tubing in spray boom with pneumatic nozzle control.
- Compressed air system with spray gun.
- Rinse water saving return valve, manually controlled.
- Large filling opening with container cleaning.
- Ladder with platform.
- Spray gun with ± 10 m hose.
- Suction hose 6 m with camlock coupling.
- Pressure line filter 100 mesh (mesh width 173 µm).
- Hitch high drawbar adjustable in 4 steps.
- Drain valve.
Options
- Pump 2 x 300 l/min
- Working width 24 m (7 sections)
- Working width 27 m (7 sections)
- Working width 24 m (7 sections, 30 m design)
- Working width 27 m (7 sections, 30 m design)
- Working width 30 m (9 sections)
- Working width 33 m (9 sections)
- Working width 36 m (9 sections) 3x
- Working width 39 m (11 sections) 3x
- Working width 39 m (11 sections) 4x
- Working width 42 m (11 sections) 4x
- Working width 45 m (11 sections) 4x
- Variable geometry ≤ 27m
- Variable geometry ≥ 30 m
- Pack pneumatics (when tractor is not equipped with an air compressor)
- Drawbar steering, Trail Control, proportional, electro-hydraulically
- Axle steering (from track width 2,20m) TC proportionally
- Hitch low drawbar
- Lowered spray boom (nozzle spacing 25cm, lowest position 300mm)
- Air suspension, incl. automatic load compensation and height adjustment (40 km/h)