Vector
Model Vector is available with working widths from
18 to 36 m.
This somewhat heavier model comes with a 3200 litres tank, and track widths of 1500 – 2250 mm.
Find a dealer in your neighbourhood >
AP DUBEX VECTOR
Technical specifications
Vector 18-27m / 30-36m
Standard equipment
Spray booms
- Electro-hydraulic height adjustment.
- Electric/hydraulic tilt control.
- Electro-hydraulically simultaneously folding main booms / outer boom sections.
- Fully balancing boom suspension.
- “Superbalans” self-levelling spray boom.
- Anti-yaw damping.
- Impact guard system on outer boom sections back and forth.
- Safety hinges on outer boom sections.
Tank and pipes
- Two tank rinsing nozzles in tank.
- Polyethylene tank 3200 l (actual content 3400 l)
with 350 l clean water tank. - Level measurement Tank Control.
- Pump 2 x 260 l/min 15 bar (18-27 m), 2 x 210 l/min, 15 bar (30-36m).
- PTO shaft one side wide-angle.
- Digital pressure gauge.
- Stainless steel spray line (Aisi 304).
Frame
- Aluminium housing on back frame boom.
- Lockable storage box on top of machine.
- Plastic caps.
- Storage locker (front right).
- Stainless steel fitting materials.
- Liquid fertilizer resistant.
- Inductive flow meter.
- RDW LED road lights.
- Air braked wheels 300/95R46, 8 holes.
- Flange width 1800 mm.
- Track width : min. 1500 / max. 2250 mm.
- SKL tested according to directive NEN-EN-ISO 16122.
- Delivered with approval certificate EU regulation 167/2013
(30 km/h).
Spraying system
- Electrical control main valve and sections.
- ISOBUS controller MIDI 3.
- Full circulation tubing in spray boom with pneumatic nozzle control.
- Compressed air system with spray gun.
- Rinse water saving return valve, manually controlled.
- Large filling opening with container cleaning.
- Ladder with platform.
- Spray gun with ± 10 m hose.
- Suction hose 6 m with camlock coupling.
- Pressure line filter 100 mesh (mesh width 173 µm).
- Hitch high drawbar adjustable in 4 steps.
- Drain valve.
Options
Vector 18-27 m
- Pump 300 l/min
- Pump 2 x 210 l/min
- Pump 2 x 260 l/min
- Working width 18 m (5 sections)
- Working width 21 m (7 sections)
- Working width 24 m (7 sections)
- Working width 27 m (7 sections)
- Electro-hydraulically folding outer boom sections left and right separately*
- Variable geometry ≤ 27m
- Pack pneumatics (when tractor is not equipped with an air compressor)
- Drawbar steering, Trail Control, proportional, electro-hydraulically
- Steering axle (from track width 2,00 – 2,25m) TC proportionally
- Hitch low drawbar
- Lowered spray boom (nozzle spacing 25cm, lowest position 300mm)
- Air suspension, incl. automatic load compensation and height adjustment (40 km/h)
* As standard on Vector 30-36m
Vector 30-36 m
- Pump 2 x 260 l/min
- Pump 2 x 300 l/min
- Working width 30 m (9 sections)
- Working width 33 m (9 sections)
- Working width 36 m (9 secttons)
- Variable geometry ≥ 30m
- Additional working widths
- Pack pneumatics (when tractor is not equipped with an air compressor)
- Drawbar steering, Trail Control, proportional, electro-hydraulically
- Steering axle (from track width 2,00 – 2,25m) TC proportionally
- Hitch low drawbar
- Lowered spray boom (nozzle spacing 25cm, lowest position 300mm)
- Air suspension, incl. automatic load compensation and height adjustment (40 km/h)